1ALS-7111/7111WMPEG4 Video ServerUser’s Manual Version 1.0
10 Note : You can specify three LED statuses by setting: 1.ON; 2.OFF; 3.Flash. For more information about setting of LED status, refer to the “Sy
11 Camera Settings After the hardware has been installed, insert the supplied CD in the computer and execute the file IP FINDER.EX following the steps
12 Notes: 1. The IP FINDER can only find the IP addresses of a video server that shares the same hub on the LAN. For information about finding I
13 Camera Setting from a Router You can use DHCP when you want to use the video server on the Intranet (LAN). However, the IP must fixed when you wa
14 Change the Internet Explorer Setting This product uses ActiveX Control to play images and sound on your PC. The ActiveX Control application softwar
15 Enter the Main Page 1. Open the IE browser and key in the IP address of the product. Key in the IP address of the video server
16 4. The security warning screen appears. Click "Install". The ActiveX Control is named "UIC ActiveX Control". This software is
17 Camera Main Page Descriptions: Source: Information bar 1. Format: resolution of the current video stream 2. FPS: Frames Per Second of the current
18 Control panel All camera/network server products using Pelco-D, Pelco-P, A-linking and UIC drivers can be controlled using the UVS-7111 Video serv
19 3. Preset: presets the rotation points for the camera (16 points) 4. Click Update to exit. 1. Click Set to enter the Preset Setting s
2 Contents Contents ...2 Package
20 4. Tour: enables/disables the tour mode of the camera. The rotation points of the camera must be set up in advance. 5. AutoPan: enable
21 6. Alert: displays alert trigger This indicator flashes to warn you when a movement or alert is detected. Click to stop the flash. 7. Al
22 8.8.Language: selects a UI language Four languages are available: English, Simplified Chinese, Traditional Chinese and Japanese. 8. Camer
23 9. View Size: selects the size of the image Select the size of the image from 0.5 to 4 X. 10. Streaming: sets the video stream protocol (HTTP is
24 11. Brightness: adjusts video brightness / Contrast: adjusts video contrast Press + (increase) or ﹣ (decrease) from the setting window to adjust th
25 14. Path: sets the save path and name for recorded images and snapshots. The filename is the recording date by default. You can identify the file b
26 System Settings System setting contains basic and application settings. The basic setting is executed for basic system information, transmission sp
27 Basic Setting >Video/Image Basic Setting > Video Image > Video Image Basic Setting > Video / Image > Video Image > 3GPP To vie
28 3. Add a new link. 4. Enter the link name. 5. Enter the IP address of the camera, e.g. rtsp://xxx.xxx.xxx.xxx:554/cam1/3gpp 7. Select this st
29 11. Video stream screen .
3 Motion Detection...63 Firmware upgrade ...
30 Basic Setting > Video / Image > Video Image >Video Format You can select MPEG4 or MJPEG as the video format. It is recommended to selec
31 Basic Setting > Video / Image > Video Image >Frame per Second (FPS): With NTSC, you can choose 30, 15, 10, 7, 6, 5, 4, 3, 2, or 1 for v
32 GOP provides users with the function to set the pages of the I Frame and P Frame to be transmitted in the MPEG4 mode. Basically, the I Frame pag
33 Brightness/contract adjustment OSD setting Date, time, and text display
34 Basic Setting > Audio (Sound) Basic Setting > Audio > Audio (sound setting) Basic Setting > Audio > Audio > Audio Raw Format Y
35 Basic Setting > PTZ >PTZ Driver Manager In the Camera Driver column, list all the drivers that are installed in the video server. Select “
36 Basic Setting > PTZ > Serial Port Setting > Data bits The number of bits used to represent one character of data. Refer to the user manu
37 同位設定
38 Basic Setting > User(User) The administration of this product can be set up access privileges by administrator, operator, and viewer to ensure t
39 Basic Setting > User > User Setting (privilege setting) For special business situations, this product allows you to log in to browse with
4 Package Contents The ALS-7111 Video Server is provided with the following accessories. Please contact your dealer if any one of the following is mis
40 Basic Setting > Network (Network setting) Basic Setting > Network > Network (cable network setting page) Basic Setting > Network >
41 Basic Setting > Network > Wireless (wireless network setting page) Note: Only UVS-7111W provides the wireless networking function. UVS-7111 a
42 Mode: Selection of the wireless networking mode 1. Infrastructure: Infrastructure networking mode This product uses the wireless Access Point (AP)
43 SSID: Service Set Identifier Enter the name of the base station (AP) to which you want to connect. WEP Encryption: WEP encryption function When th
44 Then change the settings on the wireless networking setting page to make them conform to the settings of the base station. WEP security mode:
45 or 13 sets of ASCII characters. Encoding HEX ASCII Available characters 0~9, a~f, A~F 0~9, a~f, A~Z 64 Bit 10 5 128 Bit 26 13 Ex.: Wireless m
46 Basic Setting > Network > Streaming (streaming setting) Setting of the video steaming port (HTTP and factory default are recommended) 1. HT
47 4. Where the ADSL modem and the product is connected via a switch-hub, you can press “Reboot” or restart the machine manually to try PPPoE dialing
48 Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting) The IP address (Ex. 210.168.0.22) is like a telephone number, while the w
49 Basic Setting > Network > UPnP (Universal Plug and Play) If you connect your product to a router, IP allocator, or wireless AP, your product
5 System Requirements ALS-7111/7111P/7111W Video Server Internet Environment LAN 10/100M Ethernet Wireless LAN 802.11b or 802.11g Monitor System Req
50 To activate the UPnP function in Windows OS: Ex: Windows XP: 1. Windows component installation. 2. Open Windows firewall option 1. Click Contro
51 3. View the connection device using “My Network Places” Basic Setting > Network > SMTP Server (mail server setting) This product is able t
52 Basic Setting > Network > Samba This product is able to upload the snapshots to a specified shared folder when an event is triggered. To use
53 Basic Setting > Network > Notification Of IP Address Change (IP address change notice) This setting is not necessary for a fixed IP. For a dy
54 Notification setting
55 Basic Setting > Date/Time (date/time setting) Date/Time setting Basic Setting > Date/Time > Server Time (the date/time of the server)
56 Basic Setting > IP Filter This function filters IP addresses and is able to allow or deny visits from particular addresses/target addresses.
57 Application Settings Application Setting > Event (event trigger setting page) This product is equipped with intelligent security management func
58 Add Event : Add Event setting page Options: • General: Name: Name the trigger event here. • Response to event trigger: the time setting of the tr
59 Add Schedule: Add Schedule setting page The Add Event setting page and the Add Schedule setting page are basically the same except that the Add S
6 Introduction The ALS-7111/7111P/7111W Video Servers convert any digital camera into a full functional IP camera. You can obtain all of the benefits
60 The default status of the digital input pin is set as “Normal Open”, but users can change it to “Normal grounded” by setting the page “Setting->
61 Application Setting > Event > Event Servers (setting for uploading trigger event file to the server) Here you can perform a complete setting
62 Click Add Http to go to the setting page and enter the information of the HTTP server you specified. Name: HTTP name Network Address: HTTP IP add
63 Application Setting > Motion Detection You can open the setting frame by clicking on the area to monitor. To move area to monitor, drag the area
64 Application Setting > Firmware upgrade Contact your dealer for more information about firmware upgrade. The sales representative will transmit
65 4. Click Browse… to select the location where the firmware file is stored. 5. Click submit. 6. The auto upgrade runs. The Upgrade Status shows
66 Application Setting > Factory Default You can use this function to reset to factory default, but all changes, including the IP address, you have
67 Backup: Data backup Back all parameters: Back up all changes you have made. When you click Backup, a file download window appears. Back up the file
68 Application Setting > Reboot You can enable this function for the product to reboot automatically.
69 Attachment A: External Alarm In addition to the motion detection executed by the internal software application, the product can connect to external
7 Plug the power cableSystem Introduction 1. DC power cable: The DC input connector has a socket to connect the product to a power source. 2. Ethern
70 External Alarm I/O Circuit Diagram Warning! • Where connecting of a low or high current loop to the external alarm input/output of the prod
71 Attachment B: Bandwidth Estimation Since the FPS is dependent on the bandwidth of the product, the relationship between the size of an image file a
72 Attachment C: Troubleshooting and FAQs Question Answer and Solution Function What encoder and decoder are used by the product for sounds and image
73 Please confirm that the IP address has been properly set. • The anti-virus applications on the PC or the firewall might block the IP Finder from
74 Check whether the Active X control of the video server has been installed in your computer. Select C:\Windows\Downloaded Program Files to check if
75 I can't control the camera to move up, down, right, or left smoothly. Delay might occur when you are accessing a video stream and remotely
8 LAN Socket Connect the LAN cable into the LAN socket. External alert bus (DI/DO) For more information about DI/DO, refer to Attachment A. RS-485
9 Hardware Installation 1. Select the installed place This product can be installed on any convenient flat surface, or concealed in a ceiling etc. .
Comments to this Manuals